Tangit Rapid

Features and Benefits

  • Tangit Rapid is suitable for producing tensile stress resistant connections between pipes and fittings made of PVC-U or PVC-C.
  • Complies with DIN EN 14814.
  • For EN ISO 15493 (PVC-U or PVC-C) piping systems.
  • Suitable for leak repairing, information on request.

Product Advantages

  • Long open time of 8 minutes (at 20°C).
  • For joining of PVC-U or PVC-C thermo-plastic piping systems according EN ISO 15493.
  • 2-Component Methacrylate Adhesive (1:1).
  • Optimal gap filling and thixotropic.
  • Multi-purpose application.
  • Ideal for big dimensions.
  • Easy and clean handling (without drops).
  • Good resistance to mechanical loads (4 bar/hour).

 

Packaging Details

  • 400ml Cartridge
  • 50ml Cartridge

 

Intended
Use

  • Tangit Rapid is suitable for producing tensile stress resistant connections between pipes and fittings made of PVC-U or PVC-C.
  • Complies with DIN EN 14814.
  • For EN ISO 15493 (PVC-U or PVC-C) piping systems.
  • Suitable for leak repairing, information on request.

 

Please note:

  • Open fire and sparking must be avoided at all costs.
  • Ensure good airing and ventilation of the working area.
  • Wear suitable protective clothing during work.
  • Please also refer to our Technical Data Sheet and Safety Data Sheet.

Applications  

Step 1

Cut off the pipe end at right angles, chamfer it from outside (15°) and debur it.

Step 2

Pre-clean and dry the surfaces to be bonded. Mark the fitting insertion depth on the pipe end.

Step 3

Make final cleaning with Tangit KS Cleaner Tissues. The cleaned surfaces must be dry before applying the adhesive.

Step 4

Dispense Tangit RAPID from the cartridge with dispenser and static mixer on the bonding area.

Step 5

Apply a uniform coat of adhesive in an axial direction with the plastic brush - first to the inside of the socket, then to the pipe. Apply thinly inside the socket in order to avoid the detrimental formation of beads inside the pipe but apply generously to the pipe end.

Step 6

Wipe off excess adhesive from the plastic brush. Also removing of the dried adhesives is easily possible by slightly twisting.

Step 7

Immediately insert the pipe into the socket to stop resp. to full depth, without twisting or jamming. Hold fast for several seconds until the adhesive begins to dry. As the adhesive cures rapidly, the components must be completely joined within 8 minutes after application.

Step 8

Wait 12 hours after the last bonding before filling the pipes or performing leak tests (min. waiting time 4bar/h).