Tangit PVC-C Plus Adhesive

Features and Benefits

  • For use in the presence of corrosive media* and high temperatures.
  • Construction in metal and chemical industry.
  • For warm and cold-water installations.
  • Also suitable for pressureless PVC-C pipe systems (draining of sewage) acc. to EN 1566.
  • Plastic piping systems for industrial applications acc. EN ISO 15493.

Product Advantages

  • Excellent mechanical properties, even at higher temperatures up to +80°C.
  • THF-free product.
  • Improved structure for cleaner working.
  • Very good chemical resistance*.
  • Long service life, even in highly corrosive environments.
  • Meets the requirements of EN 14814.
  • Especially suited for hot-water applications

 

Packaging Details

  • 700g Can

 

*Please, refer to www.gfps.com for detailed ChemRes support

Visit our How-to Video section

Intended
 Use

 

  • For use in the presence of corrosive media* and high temperatures, construction in metal and chemical industry and for warm and cold-water installations.
  • Required amount: Sufficient for approx. 40 bonds at d = 63 mm (calculated for 700 g).

 

Please note:

  • Open fire and sparking must be avoided at all costs.
  • Ensure good airing and ventilation of the working area.
  • Wear suitable protective clothing during work.
  • Please also refer to our Technical Data Sheet and Safety Data Sheet.

Applications  

Step 1

Cut pipes: Use a pipe cutter or a light saw to bring the pipe to an accurate length. Make sure to cut it at the right angles.

Step 2

Chamfer pipe ends: Chamfer the pipe ends with a chamfering tool. A file can be used as well.

Step 3

Debur pipe ends: use a deburrer to debur pipe ends.

Step 4

Measure insertion depth.

Step 5

Mark depth: following, mark the insertion depth at the end of the pipe.

Step 6

Clean pipe and fitting: ensure that both, the pipe and the fitting, are perfectly cleaned. Use a clean piece of paper tissue for each. Surfaces to be bonded must be completely dry before applying the adhesive.

Step 7

Stir the product and soak the brush well with the adhesive.

Step 8

Apply adhesive on the inside of the fitting: Slightly apply a thin layer of Tangit on the inside of the fitting in the direction towards the end of the pipe.

Step 9

Apply adhesive to the pipe end: cover the marked area of the pipe and actively, apply a thicker layer to the pipe end with firm brush pressure.

Step 10

Insert pipe into the fitting: Immediately afterwards, insert the pipe into the fitting to its full depth without twisting and align them correctly. Then, carefully remove the excess adhesive with absorbent paper

Documents and Downloads

TDS Tangit PVC-C Plus Adhesive 700g
Download Document

english

Safety Data Sheet
Download Document

english

Related Products

Go back