Tangit Metalock

Features and Benefits

  • Universally deployable thread sealing for all metal threads acc. ISO 7-1 up to 3”, to directly seal water-, gas- and pneumatic pipes.
  • Especially suitable for quick processing at low temperatures, e.g. outdoor maintenance work.
  • Ideal for hot-, cold-, water and gas and gas piping systems (not allowed for gas indoor installation acc. DVGW TRGI).

Product Advantages

  • Ideal for metal threads.
  • Very easy application.
  • Optimal to dose because of manageable dispenser.
  • Easy to disconnect / dissemble with standard tools.
  • Stable during vibrations.
  • Lubricates for easy assembly.
  • Temperature resistant between -50°C and +150°C.
  • Hot water (up to 130°C) approved acc. EN751-1 by DVGW.
  • Gas approved with standardized threads acc. EN751-1 by DVGW.

 

Packaging Details

  • 50ml dispenser

Intended
Use

 

  • Universally deployable thread sealing for all metal thread to directly seal water-, gas- and pneumatic pipes. Especially suitable for quick processing at low temperatures and ideal for hot-, cold-, water and gas and gas piping systems (not allowed for gas indoor installation).

 

Required amount:

  • The usage is dependent on the thread diameter.
  • Sufficient for approximately 150 threads by 1/2 threads.

 

Please note:

  • Properly tightened fittings will seal instantly to moderate pressures. For maximum pressure resistance and solvent resistance allow the product to cure a minimum of 24 hours.
  • Please also refer to our Technical Data Sheet and Safety Data Sheet.

Applications  

Step 1

Clean the thread with a cleaner and a paper tissue to make sure that make sure it's grease- and dust-free. 

Step 2

Apply the product 360° in circular direction on to the beginning of the external thread, do not apply the product to the first turn of the thread.

Step 3

Force the material up to the thread root, to correctly fill up the intermediate spaces.

Step 4

Join the pipe thread together according to customs, until the alignment is correct.